If your drive works in the other PC but its doesn't work in yours, then you likely have a configuration problem. Cargando... If your drive works in the other PC but its doesn't work in yours, then you likely have a configuration problem. Otherwise, make sure the disk you have is a bootable disk. his comment is here
Troubleshoot it hereI am getting "General failure reading drive A:" error messages trying to access the floppy diskExplanation: While attempting to access the floppy disk, you get a general failure error. If it happens often then it may be the brand of disks you are using, or it could be the drive.Recommendation:Turn the power off to the PC. The Guru Meditation 4.648 visualizaciones 44:39 Nintendo Famicom - Konami Hyper Shot Controllers - Duración: 11:51. This whole process sounds complicated but is in fact quite easy to do.If the problem occurs a great deal and you are using only one type of media, try another.If the http://www.computerhope.com/issues/ch000277.htm
If the configuration settings are correct, but these symptoms are present, a hardware problem is indicated as the cause of the problem. In this case, a bad RAM memory device is indicated. You cannot use both connectors on the same side of the twist in the cable. Información Prensa Derechos de autor Creadores Publicidad Desarrolladores +YouTube Términos Privacidad Política y seguridad Enviar sugerencias Probar las nuevas funciones Cargando...
Many people do not realize that while high-density drives are backward compatible with the double-density format (if you use the correct parameter when formatting), the media is not. If you are running Windows 95, Windows 98, Windows ME, Windows NT, Windows 2000, or Windows 2000 click Start, Shutdown, and Restart the computer to an MS-DOS prompt. Not connected properly Power down, unplug, and open computer, being aware of ESD and its potential dangers. Floppy Disk Driver Windows 7 Recordármelo más tarde Revisar Recordatorio de privacidad de YouTube, una empresa de Google Saltar navegación ESIniciar sesiónBuscar Cargando...
You may want to try swapping the floppy drive to isolate the problem to either the drive or the controller.If the floppy controller is built into the motherboard, there is a Thank You. AmiganFreak 5.109 visualizaciones 7:14 Use a normal IBM PC floppy drive on an Amiga computer. - Duración: 4:08. Reinsert the disk, making sure it goes in all the way.
In most PCs, you can use a significant event that occurs during the startup process as a key to separate hardware problems from software problems: the single beep that most PCs Floppy Disk Format Error It isn't necessary for the operation of the drive, and this will allow you to access the contents of the disk.Copy the contents of the disk to a new disk with The floppy drive may need to be replaced. "Invalid media" or "Track 00 bad" error when formatting The floppy disk may be defective. GadgetUK164 1.922 visualizaciones 11:48 Video response - 'Amiga Floppy Strangeness' - Duración: 27:02.
Usually in this case I think the controller is more likely to be at fault. If you are running Windows 3.x click File and click Exit Windows to get to an MS-DOS prompt. Floppy Disk Problems And Solutions Some drives don't seem to like some brands of disks but work better with other ones.You can "repair" a damaged disk by using a disk utility such as Microsoft's Scandisk or Floppy Drive Not Working If you want to live in a safe America, help buy Congress back for America.
Dan Wood - kookytech.net 33.827 visualizaciones 16:34 Dead Amiga 1200 rev 2B [REPAIR] - Duración: 15:23. this content Normally, symptoms can be divided into three sections: configuration problems, bootup problems, and operational problems. The metal piece isn't necessary for the disk to be able to be accessed, but it is mandatory for day-to-day use of the floppy disks. If the drive's activity light comes on as soon as the PC is booted and stays on, solid the whole time the PC is on, this is a dead ringer for The Disk Media Is Not Recognized Floppy
enter bios and switch raid-configuration on for both your harddisks (320gb each), should be working now. If your system can't recognize the floppy drive or can't read any floppy disks, try rebooting the system. RetroGameModz 5.061 visualizaciones 1:27 Video response - 'Amiga Floppy Strangeness' - Duración: 27:02. weblink Verify that a power connection is also connected to the back of the floppy drive.
Verify that the floppy connection is connected to the motherboard FDD connector. Floppy Disk Not Recognized Choosing the wrong type of drives can cause a failure to be reported.If you have a 5.25" drive that is not working, check the drive for physical interference. Sometimes an integrated controller on the motherboard can have a problem, occasionally as a result of a problem with something else on the motherboard.
You might want to troubleshoot it here.The floppy disk will not boot, but it is accessible after booting from the hard diskExplanation: The system will not boot from the floppy disk. Check the BIOS settings first; if necessary troubleshoot the drive.If you get this error on a CD-ROM drive, then this means that when the system booted, the device was not seen. If you are running Windows 3.x click File and click Exit Windows to get to an MS-DOS prompt. Symptoms Of Floppy Disk Failure Verify that the floppy cable coming from the motherboard is connected to the back of the floppy drive.
Look for the first boot device, and make sure it's set as the hard drive. Se podrá valorar cuando se haya alquilado el vídeo. These drives are large and I have seen problems like cables hanging down into the mechanics of the drive and impeding its operation.If you cannot get the drive to work, the http://casualobserver.net/floppy-disk/floppy-disk-s-fail-40-error-but-i-don-t-have-a-floppy-drive.html Problems with the floppy drive are rare, but that is not the case with floppy disks themselves.
Acción en curso... If the floppy drive's LED is always on, the data cable may be reversed. Otherwise the surface where the data is stored would be exposed to far too much damage and dirt.There is an apparent failure of the floppy disk driveExplanation: There is a general Not setup in CMOS Verify that the floppy drive is properly setup in CMOS Setup.
Because of the technology of floppy diskette drives, it is likely for a floppy diskettes to become bad. If possible, try switching the controller with another one and see if that fixes the problem.Check for resource conflicts with the controller on a built-in PC. As with all Windows(tm) systems, sometimes the operating system gets confused.