Fix Floppy Drive Not Reading Disks Tutorial Home > Floppy Disk > Floppy Drive Not Reading Disks

Floppy Drive Not Reading Disks


Even a piece of paper can stop it from reading disks. I have built computers in the past but never laptops. I am trying to open 3 old 3 1/2" floppy disks and keep getting a message to format the disk. EssentiallyMicrosoft KB 309623 says WinXP supports only 1.44MB disk format. 3-mode FD'scapable of reading/writing 720KB, 1.2MB and 1.44MB require special driversupport and support for this feature is not included in Windows

You'll find discussions about fixing problems with computer hardware, computer software, Windows, viruses, security, as well as networks and the Internet.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion can't open old floppy by most were formatted with win98 and cannot be read with later operating systems.I think I have that correct? and not the first time either). Then I click OK and I get: 'A:' is not accessible.

How To Read A Floppy Disk Without Formatting It

Bad hardware If you continue to experience issues after following the above steps it is likely that hardware within the computer is bad. Floppy disks are not a permanent storage medium and  can't be counted on last more than a few years. So it may also be a good idea to check your Floppy Drive for correct Function. Yes No View Results Poll Finishes In 8 Days.Discuss in The LoungePoll History About Us | Advertising Info | Privacy Policy | Terms Of Use and Sale | Copyright Policy |

Don't know why one newly formatted floppy should work in both new and old drives. Somewhere, I recall reading that there is a conversion routine that will enable me to convert FAT32 to NTFS.Thank you for responding Report • #3 THX 1138 December 23, 2012 at PCWorld Home Forum Today's Posts FAQ Calendar Community Groups Albums Member List Forum Actions Mark Forums Read Quick Links View Forum Leaders Who's Online What's New? Floppy Disk Format Error Many of these deals are exclusively for our Daily Deals newsletter subscribers and can't be found with our regular specials.

Not the answer you're looking for? The Disk Media Is Not Recognized Floppy If spacetime is curved, how would anyone know? It’s a little more work :-|, but having the floppy-drive work (and automatically fail when empty) instead of wait to time out is worth it (especially right now when I’m doing The time now is 22:49.

Bad floppy disketteVerify that the floppy diskette that you are attempting to read from is not write protected or bad. Floppy Disk Drive Problems If the material is saved from an older word processing or spreadsheet program, it's possible that the newer version of these programs may be able to convert them to a readable I now... Install a new 3.5" FDD in my old computer and then transfer?BTW, my 486 Micronics motherboard has a bad backup battery and I have lost my CMOS configure files.

The Disk Media Is Not Recognized Floppy

Using my old desk-top I can access all the files. This program you need, is it already installed, or is it the installer file? How To Read A Floppy Disk Without Formatting It I used an Ultrastor controller for the second drive. Floppy Disk Problems And Solutions OEM Sony unit I bought from a local computer wholesaler) could have been non-standard.

The is your problem, the heads on your old system have gone out of alignment and your new portable disk drive can't read the tracks. by laughinggull / August 18, 2005 3:02 PM PDT In reply to: wondering if you can copy the files Thanks for the detailed suggestions. Copy the files to your hard drive, then copy them back to a floppy disk using your portable USB drive. It's possible that the floppy drive mechanism and/or the floppy-to-USB bridge chipset have not implemented change line support. Floppy Disk Not Recognized

Yes, you can transfer data over a serial cable.4. If your new USB drive can't read the floppy, then another new drive isn't going to able to read them either.If I may also offer a bit of advice, floppy disks Do Not use Linux but suggest trying that or a MAC then a recovery program? Just For Grins Clean jokes, funny quotes, and hilarious comics.

Are there letters printed on the metal slider? 0Votes Share Flag Collapse - Well that is not uncommon at all by OH Smeg · 7 years ago In reply to My Floppy Disk Driver Windows 7 Then you can read the floppies that you created on your 486. Computer Type: PC/Desktop OS: Windows XP, 7, 8.1, 10, Knoppix [Debian] linux Quote BigFatLiar Posts : 1 Windows 10 New 13 Sep 2016 #6 I have the same problem and

Click the "Finish" button when thedriver installation is complete.9a.

Windows detected the drive and installed drivers for it, then told me to format the floppy disk before I can use it, but never actually activated the drive. HELP! It's not the problem with the computer, it's the fact that the heads are misaligned. Symptoms Of Floppy Disk Failure Just as there is a Finite Life for Recorded CD's and I suppose DVD's.Kodak recommend that you rerecord your Picture CD's at the 5 year mark to ovoid loosing the pictures.

The file system on your floppy disks are, and will always remain FAT12. Some old programs will run without having to install them so you could try that as well.Anyway, glad to hear you got your files you needed. So I don't want to reformat and lose the files. If you do not have a tab place tape over this hole.

Was this page useful? Lo and behold, Windows is able to use the floppy drive (and with the changes I made last time—below—it is able to use it correctly too). Where is the simple option ----'Select Drive Used' ?Learned this trying to print a file saved with a 486 DOS machine using the same drive that wrote the disk in an If it appears to be connected, disconnect, and then reconnect cable to verify cable is seated properly.

YesNo Feedback E-mail Share Print Search Recently added pages View all recent updates Useful links About Computer Hope Site Map Forum Contact Us How to Help Top 10 pages Follow us One trick is to format the floppy on your PC then files coppied onto it from another PC are more likely to be able to be copied onto your PC. Tech Tips Weekly - If you don't want our Tech Tips newsletter every day, then sign up for this weekly newsletter to get the best information of the week. Replace the following hardware in the computer in the below order.

This won't work. The reason I ask is you could get an IDE to USB cable like this - Drivers and Hardware DVD/CD SATA drive not reading disksSince I upgraded to windows 10 my SATA DVD/CD RW will not work. by OldER Mycroft · 7 years ago In reply to My computer will not read ...

Mitt kontoSökMapsYouTubePlayNyheterGmailDriveKalenderGoogle+ÖversättFotonMerDokumentBloggerKontakterHangoutsÄnnu mer från GoogleLogga inDolda fältSök efter grupper eller meddelanden Win 7 ALL How-tos Win 10 Win 8 Win 7 Win XP Win Vista Win 95/98 Win NT Win Me