Turn off the PC, unplug the power cord, then press the Power button. If there are no files already on the disk, try to re-format it. • Can't boot from a floppy drive If your operating system is Windows 2000, or Windows XP Professional, When using 'modern' twisted (ID lines are swapped between 1st and 2nd connector) cable both drives must be set to use device ID #1.", so watch out.) Most floppy cables still Or, you can try to find an old copy of LapLink, FastLynx, or Norton Commander for an elegant solution. his comment is here
Test the drive after Windows has started. Implementation: A null-modem cable is just a serial cable with pins 2 and 3 switched and pin 7 (ground) wired straight through. What's worse, if you have a proprietary floppy cable with an "edge" connection for one drive and a "pin" connection for another, you can't swap the cables without appropriate edge-to-pin and/or
solved How to get rid of Virtual "Floppy Disk" drive on my PC. While at it, do the same to the left side switch called the "Write Protect Sensor", and you will have no more "Write Protect Errors."Norm W. On a 3.5" disk you should be able to see through the hole in the upper-right corner of the disk (looking at the labeled side of the disk). Floppy Disk Format Error But if your computer is not connected to a network, there is no quicker way to back-up or share a file.
It needs to have been created as a "startup disk" or formatted with the "copy system files" option button selected. • More complex problems In order to start faster, today's systems How To Read A Floppy Disk Without Formatting It High density drives can accidentally damage the data on low density disks due to the narrower size of the high density read/write head. (For those who want more information on the Most computers need to have the floppy setup as a 3.5, 1.44MB. http://bucarotechelp.com/computers/windowsts/97112410.asp This is only a solution for two friends who don't live within driving distance of each other.
Before you open up the hood again to start swapping cables around, there's a little-known solution that works with all games that are only mildly copy-protected (they use the BIOS to Floppy Disk Driver Windows 7 Find Solutions, ask questions, and share advice with other HP product owners. Alternatively, use a communications program on both ends to start a direct connection to the other "modem" and just transfer files over some protocol, like Zmodem. warning: The edges of metal panels can cut skin.
The floppy driver should be detected during plug and play and be reinstalled. Visit Website Neat, huh? Floppy Disk Problems And Solutions Software needed: If using MSDOS 6.x, the software you need to transfer files from one PC to the other is already included (in MSDOS, it's called INTERLNK.EXE and INTERSVR.EXE). Floppy Drive Not Working Who the hell has those any more?
You should try again with a known good high density disk to make sure the drive works. this content If your floppy cable has more than one connection, verify that you have connected the floppy to the appropriate connection. Those ancient cards do not have TP connector at all - just AUI & BNC." Hardware needed: Network Interface Cards (NIC) on both ends, of course. To find out which component is at fault, move the data cables back to the machines they originally came out of so that each computer uses its original disk controller and The Disk Media Is Not Recognized Floppy
The major advantage to these is that you can get much faster transfer rates over the parallel port than the serial port; I routinely get 25K a second or higher. Related Resources solved solve my problem floppy disk drive Floppy disk drive weird problem A floppy disk drive problem? Professionals or Repairmen is to carry around a 720 formatted disk with a Dos boot record on it. http://casualobserver.net/floppy-disk/floppy-disk-s-fail-40-error-but-i-don-t-have-a-floppy-drive.html Software needed: Appropriate networking software.
It's best that it looks for itself on unit 0 (drive A:). Floppy Disk Not Recognized If you are having a problem with a floppy disk, remember they are made super cheap and are not meant to be reliable, but they can still serve a very utilitarian If it doesn't appear to format at all or hangs, then go to the next step: Failing the high density test, go back into the BIOS setup and set it up
While this is not a hard and fast rule, about 95% of all the unlabeled disks you find without a hub ring will be high density disks. The drive light comes on and stays on permanently as soon as it is powered up; drive doesn't appear to work While this looks like a broken floppy drive, it really Well, boys and girls, you'll have to get your hands on a real live 5.25" floppy drive to get around that. Symptoms Of Floppy Disk Failure The culprit is the "Media Type Sensor", located on the right side of the drive looking inward.
Learn how to determine whether the drive controller or the drive itself is bad. To reduce the chance of ESD damage, work over a noncarpeted floor, use a static dissipative work surface (such as a conductive foam pad), and wear an ESD wrist strap connected You sometimes can't believe the diverse number of tricks and flaws that copy protection exploits to fool diskcopy programs. check over here Unfortunately, there are no serviceable parts on a disk controller.
The last two are collections of patches by various software pirates, and include a little interface to help guide you. Listed below are the most likely causes and the solution for each cause. If your computer was purchased after 2001, it probably contains a software program called PC Doctor. This works best if you just want to grab some old databases or word processing files or something, and can discard the disks when you're done.
Making noise, vibrations?Have you only tried one floppy disk?Check to make sure your data cable is not backwards (stripe on the end of the cable is nearest the power plug).You can In Setup, press F5 on the keyboard to load defaults. If the boot sequence starts with the letter of a hard disk drive (like C:), and that drive is having a problem, the system will never even attempt to boot from After answering yes, that I want to format the disk, it comes back with a message "Windows cannot format this drive.
Solution: Insert a diskette into the floppy drive or close the software that is accessing the drive. well, you just don't want to take any chances with copy-protection. Gigabyte GA-G31M-ES2L Rev. 2.4,computer problem with floppy disk. I cannot see floppy drive in disk management cosole?
Brian Cooley found it for you at CES 2017 in Las Vegas and the North American International Auto Show in Detroit. Turn the computer on. Get the answer dmenJun 29, 2010, 2:37 PM hang-the-9 said: Is the drive making any attempts to read the floppy? SHOW ME NOW CNET © CBS Interactive Inc. / All Rights Reserved.
However, once you’ve verified that a problem isn't caused by a corrupt disk, an OS conflict, or a loose cable, you need to determine whether the problem lies with the floppy Cracking is against 99.9% of all software licenses (the part about "re-engineering and/or disassembling"), so doing it is illegal. Bad drivers If you are not able to read or write to a floppy diskette from Windows, verify that the computer is not exhibiting floppy drivers issues by testing the floppy