For example, if you're planning on using this drive to store movies, name the volume Movies. For File system: choose NTFS unless you have a specific need to choose another file system.NTFS When you see the message "Press any key to boot from CD," press a key on the keyboard. OS X can read and write to it. If you're using Linux, you can use a live CD to format a drive. check over here
This Walkthrough Should Help Article How To Update Drivers in Windows Article How To Restore the Registry in Windows Article Easy Steps on How To Wipe a Computer Hard Drive Article How to format a RAID drive If you have two or more disks configured as a RAID, there are various ways to format these drives. Case Sensitive is for use with UNIX. NTFS-3G is an open-source program that, when coupled with MacFuse, will let you use your NTFS drive on your Mac.
Did this article help you? If not, the option will be greyed out. Once that's done, right-click in the hatched Unallocated space and choose New Simple Volume… Follow the instructions, choosing how big you want the partition to be (in MB - 1024MB =
You should choose NTFS as the file system if it isn't already selected for Windows Vista, 7, 8 or 10 and ensure the Allocation Unit Size is set to 'DefaultAllocation Size'. See the above section for more details on which one to pick.Give your drive a name under "Volume Label," and check the "Quick Format" box.Click "Start" to format the drive. Make sure you've backed everything up before you reinstall! How To Format Internal Hard Drive How to Boot From a CD or USB Drive on Any PC How to Boot From a CD or USB Drive on Any PC How to Boot From a CD or
Dear Lifehacker, I have a few old computers I'm planning to donate to charity, but I want to… Read more Read more If you just want to reinstall your operating system How To Format A Hard Drive From Bios Steps Method 1 For Windows XP 1 Back up your data. This step is not required but recommended. http://lifehacker.com/how-to-erase-and-format-a-hard-drive-1525128357 Type X: (where x is the CD-ROM drive, often this is D:).
If your disk is larger than 2TB, you should opt for GPT (GUID Partition Table). Format Hard Drive From Command Prompt C: and /dev/hda are your primary partitions. On the "Ready to reset your PC" screen, click Reset. Windows XP and 2000 Insert the Windows XP/2000 installation CD in the CD-ROM drive and restart the computer.
by Tom Merritt 2:55 Close Drag If you've considered these issues and would still like to use FAT32, this video will guide you through the process of formatting your HD to You obviously can't erase the drive while you're using it, so you'll need to format from a bootable CD or USB drive. How To Format Hard Drive Windows 7 The reason is because it needs to be initialised and formatted - you can do this in Disk Management. How To Format A Hard Drive Windows 10 Select the Drive Options (advanced) option.
MS-DOS Place the first MS-DOS diskette into the computer. check my blog For example, a C: and D: partition may exist on one drive. How to install Microsoft Windows XP How to install Microsoft Windows 2000. The formatting process will erase the hard drive before installing Windows. How To Format External Hard Drive
For File System, choose NTFS if you’ll be using the drive only with Windows machines. When you come to format the partition, our advice is the same as in the Quick Format section above. In the end, you may end up using FAT32 for its simplicity, but don't say I didn't warn you about the risks. http://casualobserver.net/hard-drive/formatting-drive.html Unpartitioned drives appear with solid black bars and the label "Unallocated." Partitioned drives appear with solid blue bars and a drive letter.Partitioning your driveTo format an internal or external hard drive
As a note: Windows 8 users will need to search for 'ThisPC' within the Metro interface. Reformat Hard Drive Mac If you don't see a prompt, look in the list of drives and you should see one that says 'Not Initialized'. Once that information is complete, click create.
Windows will be reset, either keeping your personal files intact or erasing everything, depending on the option you selected. It's a little confusing as the numbers are displayed in MB rather than GB, but you can adjust the amount of space to shrink and the 'Total size after shrink' will How to Boot From a CD or USB Drive on Any PC How to Boot From a CD or USB Drive on Any PC How to Boot From a CD or How To Format Hard Drive Windows Xp Unable to restore computer using restore disc.
Upon selecting the option, you'll be presented with three separate options: Keep my files Remove everything Restore factory settings (not available on all PCs) 'Keep my files' saves your personal files In case the answer did not answer your question, you can always visit the forum for help from G-Technology users. To comment on this article and other PCWorld content, visit our Facebook page or our Twitter feed. http://casualobserver.net/hard-drive/formatting-a-new-drive.html Using Windows' built-in Disk Management tool Type diskmgmt.msc or Disk Management into the search box in Vista, 7, 8 or 10 and then click on only result that appears in the
Luckily, the Disk Management utility makes this really easy. Right-click the blue bar or the white space below it and select Format.Choose a name for the partition under "Volume label." For File Here's our... How Do I Securely Wipe a Computer? If you keep your hard drive's out-of-the-box NTFS format for all the reasons FAT32 displeases, there's a workaround that will allow your Mac to read and write files to the drive.
In the BIOS, navigate to the boot order settings, and change the primary boot device to the USB drive (it shouldn't need to be plugged in to make this selection). Linux machines can read unencrypted NTFS partitions as well.If you will be sharing the information on this drive with Macs, choose exFAT. Windows 10 Windows 8 Windows 7 and Vista Windows XP and 2000 MS-DOS 5.0+, Windows 3.x, 9x/ME, and NT 4.0 Tip: If you have an OEM computer (Acer, ASUS, Dell, HP, OS X can read and write to it.
Windows may prompt you to accept the creation of a small, system-reserved partition--accept it. Here are a few of the more popular file systems you'll see: Advertisement Advertisement NTFS: This is Windows' default file system. HDD The Guardian Series: Highly Specialized Internal Drives Rescue We Can Recover Your Files, Just in Case. In under a minute your hard drive will be formatted.
In some cases, you may need to boot the computer with CD-ROM support or press a key to boot from the disk. How to reset Windows 10 Windows 10 has a slightly different approach and might confuse those coming from Windows 8. If you want to save any of the data on the disk, back it up by copying it to a CD or another hard drive. And, no: the answer isn't always FAT32.
Windows 3.x Place the first diskette of Windows 3.x into the computer. Create new partitions by selecting unallocated space, clicking Drive options (advanced), and clicking New.Select Format after creating your partition(s). Keep "Allocation unit size" at Default. Got a beginner tech support question you constantly answer?
This is because computers measure space differently than they are marketed, so you'll never get that exact same number, at least on Windows. Simply right-click on one and choose the appropriate option from the menu that appears. How to reset Windows 10 and refresh Windows 8 If your PC is having problems and you don't wish to lose your personal files by wiping your hard drive, then you Choose a name for the partition under Volume label.