Your website got me passed this and told me how to do it without that. Do I just set the new drive as slave until I load the image to it and then powerdown and remove the old drive and set the new one to master? sometimes learning new stuff is also learning how to say it. That process take a few minutes, then remove the floppy and reboot.
Thank you. They are, of course, formatted NTFS. Materials RequiredHard driveCopy of the hard drive manual (if you need to set jumpers; this can be downloaded if your drive didn't come with one)Controller card (optional; use this if you Reply Grail on January 20, 2009 at 12:54 pm this guide is … what can I say? https://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/a-floppy-disk-drive-shows-in-my-computer-when-no/12af1bd0-84c4-43b9-8da0-76c859b4d068
May 12, 2007 Marc Munoz WHen I bring up the screen you have above I do not see any drives or drive letters. Reply Jimmy on December 1, 2008 at 8:49 pm Thanks, I was having an issue initializing my second SATA hard drive. I'm trying to get my computer at work to recognize my jump drive, but I don't have administrative priviledges to access the disk management, so I can't change the drive letter
See MSDN http://msdn2.microsoft.com/en-us/library/ms802377.aspx for an explanation. The IT department set the E Drive to some network drive and hence my computer though recognizes the external hard drive/USB sticks and installs the driver, never used to let me This drive will be the main drive, but not until I load the image from the old drive. External Hard Disk Not Detected In Windows Xp This article is very easy to follow and detailed.
My drive was lost for weeks. Windows Xp External Hard Drive Not Showing Up Go Back. I've rebooted, I've deleted all the USB entries in the system tree, yada yada, to NO AVAIL. http://www.softwaretipsandtricks.com/forum/windows-xp/16990-floppy-drive-doesnt-appear-my-computer.html Thanx, (detailed) advice HUGELY appreciated!
I installed a Seagate 250GB external hard drive. Gpt Protective Partition Windows Xp I was actually wondering if there was another way to do this. Vista was off the table from the get-go for me so this is just moving up the time table a bit since XP was my last windows OS ever anyway… Get It is also possible to add a drive letter or mount point when windows hasn't done so for you.
They both show even after removing it and restarting…. http://www.howtogeek.com/howto/windows/find-your-missing-usb-drive-on-windows-xp/ AndrewC10-07-2003, 01:51 PMM$ have the following which is perhaps a partial cause. External Hard Drive For Windows Xp Should I try Cable select? Windows Xp External Hard Drive Not Recognized I searched for "external usb drive will not mount in windows-xp" to get here.
Also when i boot the windows XP system with the external drive connected, it will not start. Copyright 1990-2003 Dell Computer Corp. If you have tried my solution (or find a better one) for Windows Vista, please let me know :) A free way to help me would be to link back to IDE hard drives have settings for master, slave and cable select. Windows Xp Not Detecting Usb Devices
Make the new boot disk: Floppy: Run the fixntldr.exe file by double clicking it. E: says Healthy (Active) and F: says Healthy. Thank you! The Tutorial worked perfectly for me and was a real time saver.
It also runs automatically each time the system is booted up without the need for tedious repetitive configuration of individual drives. External Hard Drive Compatible With Windows Xp You might notice that you can select Add, which would let you mount the drive into a folder if you wanted to. Does anyone know how i can get back there and boot to Win 98 again ??Thank you hellred 23:03 14 Mar 04 Thanks for your help, there is a bit
I can navigate to it from the command prompt with no problem. If you are adding a second drive, simply choose a connector on the same ribbon cable that is not used. In the bottom of the screen BOTH drives are shown as drive 0. Windows Xp Pen Drive Not Detected May 8, 2008 Jeremy I am a Network Technician Consultant and I want to say that this is the first time belief it or not that the USB Backup HD did
Device manager, the USB Plug & Play, etc. Whether or not it is an Intel/W2K link, or that I simply haven't enough AMD based PCs to run into similar problems, I don't know. Most IDE ribbon cables come with three connectors: one on the end (usually black) and one mid-way (usually gray), then one further away on the other end which connects to the October 13, 2007 Bob Banks THANKS!
It kept the letter I had assigned to it. OK.Find the new c:\boot.ini. Now I can use all my external hard drives, USB jump drives and card readers from my computer. Cheers Ernie Reply Joshcore on July 31, 2007 at 11:04 pm Well done, Ernie 🙂 Reply William on August 3, 2007 at 6:08 pm Hi Joshcore thanks for the advice,I am
I did a virus scan of the HD before transferring the files. Sadly no nearer a solution! February 13, 2008 mysticgeek Good call Jeremy! I don't know if the drive itself went bad or it is a Windows XP issue.